V-Fast Lithium Battery Charger 60V12A (Super Fast Series)
An elite, industrial-grade power solution meticulously engineered for 60V (16S NCM) Lithium-ion commercial electric vehicles and high-frequency battery swapping stations. Encased in a thick aluminum alloy shell and driven by a massive 12.0A super fast output, it guarantees maximum operational uptime. Utilizing a strict 2-stage CC-CV protocol and achieving an unprecedented 93% efficiency, it delivers supreme safety, zero float charge, and ultimate thermal stability.
▪️ Lithium Calibrated: Precisely engineered for 16-Series (16S) NCM Li-ion battery banks
▪️ Extreme Speed: 67.2V ± 0.2V / 12.0A ± 0.5A (Super Fast Charging for rapid energy recovery)
▪️ Industrial Build: Thick Aluminum Alloy Shell for whole-body cooling and extreme impact resistance
▪️ Top Efficiency: ≥ 93% Industrial Grade Architecture (Maximizes power transfer, minimizes heat)
▪️ Ultimate Safety: 2-Stage Charging (CC-CV) with strict auto cut-off and NO float charging
12.0A Super Fast Charge | Thick Aluminum Shell | 93% High Efficiency | OEM Factory

Built for extreme commercial demands, this industrial-grade architecture delivers a colossal 12.0A current. Achieving a groundbreaking ≥ 93% power efficiency, it converts AC to DC with minimal thermal loss, allowing massive fleet batteries to be fully replenished at unprecedented speeds.
Pushing 12 Amps generates massive energy. The entire chassis is constructed from a Thick Aluminum Alloy, acting as a giant heat sink for whole-body cooling. Combined with a Smart Temp-controlled Fan that auto-adjusts its speed, it completely prevents overheating during heavy-duty operations.
| No. | Parameter Item | Specification Value | Remark |
|---|---|---|---|
| 1 | Rated Voltage | AC 220V | Standard 50Hz Mains Input |
| 2 | Input Voltage Range | AC 180V ~ 240V | Wide Voltage Adaptation |
| 3 | Frequency Range | 47Hz ~ 63Hz | Adapts to Global Grid |
| 4 | Efficiency | ≥ 93% | Industrial Grade Architecture |
| 5 | No-load Power | ≤ 10.0W | Standby Power Consumption |
| 6 | Output Voltage (Max) | 67.2V ± 0.2V | For 16S NCM Li-ion Battery |
| 7 | Output Current | 12.0A ± 0.5A | Super Fast Charging |
| 8 | Output Voltage Range | 45V ~ 67.2V | Wide Output, Supports 0V Activation |
| 9 | Ripple & Noise | ≤ 350mVp-p | Stable even at High Power |
| 10 | Output Mode | 2-Stage Charging (CC - CV) | Auto Cut-off when full, Safe |
| 11 | Cooling Method | Smart Temp-controlled Fan | Auto-adjust speed by temp |
| 12 | Shell Material | Thick Aluminum Alloy | Whole body cooling, prevent overheat |
Strategically headquartered in Changzhou, China, V-Fast is a tier-one manufacturing hub driving the global commercial transition to high-capacity Lithium-ion EVs. The 60V12A Super Fast Lithium Charger is our pinnacle industrial unit. Encased in thick aluminum alloy and boasting a 93% efficiency rate, it is rigorously engineered to safely manage extreme charging speeds while fully protecting expensive Li-ion packs via strict BMS synergy. Designed specifically for battery swapping networks and heavy-duty logistics fleets across Africa and Southeast Asia, we offer profound B2B OEM/ODM customizations. We supply robust regional AC plugs, specialized high-amp aviation DC connectors (e.g., Anderson, XT90, REMA), and integrate your permanent corporate branding onto the housing, ensuring you command absolute market leadership.
A: A massive 12.0A output generates intense internal heat. The thick aluminum shell acts as a giant conductive heat sink, achieving "whole body cooling." It absorbs and dissipates heat far more effectively than plastic, while providing critical impact resistance for rugged industrial or swap-station use.
A: This is an "Industrial Grade Architecture." 93% efficiency means exceptionally little AC power is wasted as heat during conversion. This protects the internal MOSFETs from thermal decay and translates directly into enormous electricity cost savings for high-volume fleet operators.
A: 12.0A is Super Fast Charging. If you have a massive 60Ah lithium battery pack used in heavy cargo EVs, a standard 3A charger would take 20 hours. This 12A charger will fully replenish it in just about 5 hours, drastically increasing operational uptime.
A: Lithium cells will degrade, swell, and risk catching fire if subjected to "Float" or trickle charging. Our strict 2-Stage CC-CV algorithm explicitly cuts off all primary power the precise moment 67.2V is reached, guaranteeing absolute battery safety.
A: The built-in high-speed fan is linked to a thermal sensor. It automatically adjusts its rotational speed based on the charger's internal temperature. During peak 12A output in hot climates, it spins at maximum velocity, slowing down as the battery reaches saturation.
A: Delivering a colossal 12 Amps inherently creates slightly more electrical noise than slower chargers. However, ≤ 350mVp-p remains an exceptionally stable threshold for industrial power. It is fully filtered to ensure it remains perfectly safe and stable for the Lithium BMS.
A: If a lithium battery is over-discharged, its BMS enters a protective sleep state (reading 0V at the port). This charger emits a specialized, safe low-current pulse to "wake up" the BMS, restoring communication before unleashing the full 12A fast charge.
A: It is fortified with an AC 180V-240V Wide Voltage Adaptation design. This wide input tolerance protects both the charger's high-power architecture and the connected lithium battery from destructive power surges and severe brownouts.
A: Yes. A 12.0A continuous current absolutely mandates heavy-duty connectors to prevent melting or arcing. As an OEM, we will equip the chargers with high-amp rated connectors (e.g., Anderson, XT90, REMA) exactly matched to your battery packs.
A: Absolutely. While this specific model is expertly tuned for 16S NCM (67.2V), as a direct source factory, we can seamlessly recalibrate the PCBA for 17S NCM (71.4V) or 20S LiFePO4 (73.0V) chemistries based on your exact OEM volume specifications.