V-Fast High-Power Aluminum Shell Charger 72V30A
An absolute industrial powerhouse engineered for extreme heavy-duty electric tricycles, E-rickshaws, and massive 72V lead-acid battery fleets. Encased in an Extra-thick Aluminum Alloy shell and delivering a staggering 30.0A ultimate fast-charging output, it drastically slashes charging times for the largest battery banks. Featuring an advanced Smart 5-Stage Pulse Charging algorithm, it actively breaks down sulfation to extend battery life, while maintaining absolute thermal stability via dual industrial ball fans and an ultra-fast ≤ 200μs dynamic response.
▪️ Ultimate Power: 88.2V - 89.5V / 30.0A ± 1.0A (Ultimate fast charging current for massive 72V lead-acid packs)
▪️ Hardcore Armor: Extra-thick Aluminum Alloy Shell for rapid cooling and extreme heavy-duty impact resistance
▪️ Advanced Tech: Smart 5-Stage Pulse Charging (Pre-charge, CC, CV, Float, Pulse Maintenance) to actively extend battery life
▪️ Dynamic Stability: ≤ 200μs ultra-fast response adapts to large battery load dynamics seamlessly
▪️ Heavy-Duty Cooling: Dual Ball Bearing Fans ensuring strong cooling airflow for 100% continuous heavy load
30.0A Ultimate Fast Charge | Extra-thick Aluminum | 5-Stage Smart Pulse | OEM Factory

Processing over 2600W of power, this juggernaut delivers a staggering 30.0A industrial-strength current. To manage this immense thermal and electrical load securely, it is encased in an Extra-thick Aluminum Alloy shell. This provides hardcore impact resistance for rough terrains and acts as a massive thermal conductor for rapid heat dissipation.
Massive 72V lead-acid battery banks suffer from severe sulfation. Our advanced 5-Stage algorithm (Pre-charge, CC, CV, Float, Pulse) introduces a dedicated Pulse Maintenance stage. This actively breaks down lead sulfate crystals on the battery plates, reviving lost capacity and saving operators thousands in replacement costs.
When charging ultra-large battery banks, the internal resistance fluctuates violently. The ≤ 200μs ultra-fast dynamic response means the charger's micro-controller instantly adjusts the voltage and current to perfectly adapt to large battery dynamics, ensuring an incredibly stable ≥ 93% high-efficiency conversion.
| No. | Parameter Item | Specification Value | Remark |
|---|---|---|---|
| 1 | Rated Voltage | AC 220V | Standard 50Hz Mains Input |
| 2 | Input Voltage Range | AC 180V ~ 265V | Adaptable to Complex Grid Fluctuations |
| 3 | Frequency Range | 47Hz ~ 63Hz | Universal Frequency Adaptation |
| 4 | Efficiency | ≥ 93% | Industrial Power Conversion Tech |
| 5 | No-load Power | ≤ 18.0W | Standby Power Consumption |
| 6 | Shell Material | Extra-thick Aluminum | Rapid Cooling, Heavy Duty |
| 7 | Output Voltage (Max) | 88.2V - 89.5V | Ensures Full Charge for Large Packs |
| 8 | Output Current | 30.0A ± 1.0A | Ultimate Fast Charging Current |
| 9 | Output Voltage Range | 60V ~ 90V | Wide Range Voltage Tracking |
| 10 | Dynamic Response | ≤ 200μs | Adapts to Large Battery Dynamics |
| 11 | Charging Mode | Smart 5-Stage Pulse | Pre-CC-CV-Float-Pulse Maintenance |
| 12 | Cooling System | Dual Ball Bearing Fans | Strong Cooling for 100% Load |
Strategically headquartered in Changzhou, China, V-Fast is a tier-one manufacturing hub driving high-power solutions for the global commercial EV sector. The 72V30A High-Power Aluminum Shell Charger is our definitive industrial masterpiece. Boasting an ultra-wide 180V-265V input tolerance, ≥ 93% efficiency, and a hardcore extra-thick aluminum chassis, it is rigorously engineered to thrive in the harshest heavy-duty logistics and E-Rickshaw environments of India, Africa, and Southeast Asia. We offer profound B2B OEM/ODM customizations for vehicle manufacturers: from supplying heavy-duty regional AC cords and specialized high-amp DC terminals (e.g., Anderson, Heavy Ring Terminals), to deep laser-etching your corporate branding directly into the aluminum armor, empowering you to dominate the heavy-duty commercial market.
A: Heavy E-Rickshaws and industrial EVs use massive lead-acid battery banks (often exceeding 150Ah-200Ah). A 30.0A industrial unit slashes charging time drastically compared to standard 5A/10A chargers, allowing commercial vehicles to complete multiple shifts per day, multiplying their earning potential.
A: Generating 30 Amps produces massive heat and requires huge internal transformers. The extra-thick aluminum shell acts as a hardcore structural armor against drops in rough environments, and simultaneously serves as a highly efficient conductive heat sink for the entire unit.
A: After the main bulk and float stages, the final "Pulse" stage applies a carefully calibrated micro-pulse current. This targets and breaks down lead sulfate crystals on the battery plates, actively restoring lost capacity and extending the lifespan of expensive battery banks.
A: A 72V system contains six 12V batteries. To fully overcome severe internal chemical resistance in large batteries and ensure a 100% deep charge, the charger must provide approximately 14.7V to 14.9V per battery, which totals 88.2V to 89.5V peak.
A: When charging massive battery banks, the internal resistance fluctuates rapidly. The ≤ 200μs ultra-fast dynamic response means the charger's micro-controller instantly adjusts the voltage and current to perfectly match the battery's real-time state, ensuring smooth power delivery.
A: A 30A full-load operation runs extremely hot (over 2600W). Standard sleeve fans dry out and fail rapidly. Dual ball-bearing fans are industrial-rated to run 24/7 in dusty, hot environments, guaranteeing strong airflow for 100% load operation with a massive lifespan.
A: This unit is strictly calibrated for high-capacity Lead-Acid batteries, peaking at 88.2V - 89.5V with a 5-stage pulse curve. (For high-power Lithium chargers, please refer to our dedicated Li-ion series or request an OEM recalibration).
A: Industrial zones and developing regions often suffer from extreme grid fluctuations. Our widened 180V-265V industrial-grade input acts as a heavy-duty buffer, preventing the charger's capacitors from blowing out during severe power surges or brownouts.
A: Yes. A 30A continuous draw requires heavy-duty wiring. As an OEM factory, we equip these chargers with thick-gauge AC cords and high-amp DC terminals (such as Anderson connectors or heavy-duty ring terminals) matching your specific vehicle design.
A: Absolutely. The extra-thick aluminum casing provides a premium canvas. We offer permanent, high-contrast laser etching of your corporate logo and technical specifications directly onto the metal, elevating your brand's industrial authority.